At our Coral Way yard
Building Materials
Lumber, plywood, concrete and block, drywall, roofing and more for contractors and homeowners.
Decking & siding catalogsSpecial order - Trex, Fiberon, NewTechWood and more Open → Official hurricane guide - Miami-Dade County (PDF)What to use to protect windows and doors in the HVHZ Open ↗
What the official guides recommend
- Miami-Dade County: secure windows and doors with County-approved storm shutters, or board up windows with 5/8-inch plywood. Tape does NOT prevent windows from breaking.
- FLASH: use exterior-grade (CDX) plywood 5/8-inch or thicker, brace joined panels with 2x4s along the seam, and fasten with lag screws or expansion bolts and anchors.
Shown below: the products we carry that match. Ask our team about shutters and fasteners.
Sources: Miami-Dade County - Guide to Hurricane Readiness (PDF) ↗ · FLASH - Emergency Board Up guide (PDF) ↗
Lumber 111
-
Dougls Fir 4"x 6"x12' S&B R/S Douglas fir timber, rough sawn, 4x6, 12 ft long. For beams, headers, posts and heavy framing.
-
Dougls Fir 4"x 6"x20' S&B R/S Douglas fir timber, rough sawn, 4x6, 20 ft long. For beams, headers, posts and heavy framing.
-
Dougls Fir 4"x10"x 8' S&B R/S Douglas fir timber, rough sawn, 4x10, 8 ft long. For beams, headers, posts and heavy framing.
-
Dougls Fir 4"x10"x16' S&B R/S Douglas fir timber, rough sawn, 4x10, 16 ft long. For beams, headers, posts and heavy framing.
-
P.T. 1"x 2"x 8' S.Y. Pine #2 Pressure-treated Southern Yellow Pine, #2 grade, 1x2, 8 ft long. For furring, nailers and outdoor work.
-
P.T. 1"x 4"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x4, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 4"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x4, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 4"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x4, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 6"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x6, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 6"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x6, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 6"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x6, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 8"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x8, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 8"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x8, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 1"x 8"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 1x8, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 4"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x4, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 4"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x4, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 4"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x4, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 4"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x4, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x18' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 18 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 6"x20' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x6, 20 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 8"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x8, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 8"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x8, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 8"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x8, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 8"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x8, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x 8"x20' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x8, 20 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x10"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x10, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x10"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x10, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x10"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x10, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x10"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x10, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x12"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x12, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x12"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x12, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x12"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x12, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x12"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x12, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 2"x12"x18' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 2x12, 18 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 4"x 4"x 8' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 4x4, 8 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 4"x 4"x10' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 4x4, 10 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 4"x 4"x12' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 4x4, 12 ft long. For decks, fences, sill plates and outdoor framing.
-
P.T. 4"x 4"x16' S.Y. Pine S4S Pressure-treated Southern Yellow Pine, smooth on four sides (S4S), 4x4, 16 ft long. For decks, fences, sill plates and outdoor framing.
-
Primed SPF 2"x 8"x16' *Fascia* Primed fascia board, 2x8, 16 ft long, ready to paint. For roof edges and exterior trim.
-
S.P.F. 2"x 4"x 8' Spruce-pine-fir framing stud, 2x4, 8 ft long. For interior wall framing.
-
S.P.F. 2"x 4"x10' Spruce-pine-fir framing stud, 2x4, 10 ft long. For interior wall framing.
-
S.P.F. 2"x 4"x12' Spruce-pine-fir framing stud, 2x4, 12 ft long. For interior wall framing.
-
S.P.F. 2"x 4"x16' Spruce-pine-fir framing stud, 2x4, 16 ft long. For interior wall framing.
-
Spruce 1"x 4"x 8' #3 Spruce board, #3 grade, 1x4, 8 ft long. For furring, blocking and general use.
-
Spruce 1"x 6"x 8' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x6, 8 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x 8"x 8' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x8, 8 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x 8"x10' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x8, 10 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x 8"x12' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x8, 12 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x 8"x14' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x8, 14 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x 8"x16' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x8, 16 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x10"x 8' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x10, 8 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x10"x10' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x10, 10 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x10"x12' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x10, 12 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x10"x14' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x10, 14 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x10"x16' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x10, 16 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x12"x 8' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x12, 8 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x12"x10' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x12, 10 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x12"x12' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x12, 12 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x12"x14' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x12, 14 ft long. For trim, shelving and interior finish work.
-
Spruce 1"x12"x16' #2 Elite S4S Spruce board, #2 Elite, smooth on four sides, 1x12, 16 ft long. For trim, shelving and interior finish work.
-
Stake Yel Pine 7/8"x3"x24" Pointed yellow pine wood stake, 7/8" x 3" x 24". For layout, forms and landscaping.
-
W.R. Cedar 2"x 8"x 8' Rgh Swn Western red cedar, 2x8, 8 ft long - naturally rot- and insect-resistant. For outdoor trim, fences and pergolas.
-
W.R. Cedar 2"x 8"x10' Rgh Swn Western red cedar, 2x8, 10 ft long - naturally rot- and insect-resistant. For outdoor trim, fences and pergolas.
-
White SPF 2"x 8"x16' *Fascia* Primed fascia board, 2x8, 16 ft long, ready to paint. For roof edges and exterior trim.
-
Yellow Pine 1"x6" V/J T&G Yellow pine tongue-and-groove board with a V-joint, 1" x 6". For ceilings, soffits, porch ceilings and wainscoting.
-
Yellow Pine 1"x6" V/J T&G 12' Yellow pine tongue-and-groove board with a V-joint, 1" x 6". For ceilings, soffits, porch ceilings and wainscoting.
-
Yellow Pine 1"x6" V/J T&G 14' Yellow pine tongue-and-groove board with a V-joint, 1" x 6". For ceilings, soffits, porch ceilings and wainscoting.
-
Yellow Pine 1"x6" V/J T&G 16' Yellow pine tongue-and-groove board with a V-joint, 1" x 6". For ceilings, soffits, porch ceilings and wainscoting.
-
Yellow Pine 1"x8" V/J T&G R/L Yellow pine tongue-and-groove board with a V-joint, 1" x 8". For ceilings, soffits, porch ceilings and wainscoting.
-
Yellow Pine 2"x10"x 8' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x10, 8 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x10"x10' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x10, 10 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x10"x12' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x10, 12 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x10"x16' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x10, 16 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x10"x20' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x10, 20 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x12"x 8' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x12, 8 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x12"x10' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x12, 10 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x12"x12' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x12, 12 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x12"x16' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x12, 16 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x12"x20' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x12, 20 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x4"x12' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x4, 12 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x4"x16' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x4, 16 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x6"x 8' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x6, 8 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x6"x10' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x6, 10 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x6"x12' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x6, 12 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x6"x16' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x6, 16 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x6"x20' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x6, 20 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x8"x10' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x8, 10 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x8"x12' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x8, 12 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x8"x16' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x8, 16 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x8"x20' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x8, 20 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 2"x8"x8' #2 Brite Southern Yellow Pine, #2 grade, untreated, 2x8, 8 ft long. For structural framing - joists, rafters and headers.
-
Yellow Pine 7/8"x3" Yellow pine furring strip, 7/8" x 3". For furring walls and ceilings.
-
Yellow Pine 7/8"x3"x12' Yellow pine furring strip, 7/8x3, 12 ft long. For furring walls and ceilings.
-
Yellow Pine 7/8"x3"x16' Yellow pine furring strip, 7/8x3, 16 ft long. For furring walls and ceilings.
-
1"x4"x14'-T&G-Select Yellow Pine Yellow pine tongue-and-groove board with a V-joint, 1x4, 14 ft long. For ceilings, soffits, porch ceilings and wainscoting.
-
1"x4"x16'-T&G-Select Yellow Pine Yellow pine tongue-and-groove board with a V-joint, 1x4, 16 ft long. For ceilings, soffits, porch ceilings and wainscoting.
-
1"x6" Yellow Pine T&G V/J D&Better Yellow pine tongue-and-groove board with a V-joint, 1" x 6". For ceilings, soffits, porch ceilings and wainscoting.
-
1"x6"x12'-#2 P.T-T&G Pressure-treated pine, tongue and groove, 1x6, 12 ft long. For porch floors, ceilings and outdoor soffits.
-
1"x6"x16'-T&G #1-yellow Pine Select Yellow pine tongue-and-groove board with a V-joint, 1x6, 16 ft long. For ceilings, soffits, porch ceilings and wainscoting.
-
1'X6"X12'-#2 P.T.-T&G Pressure-treated pine, tongue and groove, 6" wide, 12 ft long. For porch floors, ceilings and outdoor soffits.
-
2"x4"x8'-western Red Cedar Smooth Western red cedar, 2x4, 8 ft long - naturally rot- and insect-resistant. For outdoor trim, fences and pergolas.
-
3 X 6 X 16 P.T. Ag S4S Pressure-treated pine for above-ground use, smooth on four sides, 3x6, 16 ft long. Special order.
-
3 X 6 X 16' S4S Pt-Ag Pressure-treated pine for above-ground use, smooth on four sides, 3x6, 16 ft long. Special order.
-
3 X 8 X 16' S4S Pt-Ag Pressure-treated pine for above-ground use, smooth on four sides, 3x8, 16 ft long. Special order.
-
3"X 12"X 16' PT # 1 S4S Pressure-treated #1 grade pine, smooth on four sides, 3x12, 16 ft long. Special order.
-
3"X 8" X 16' PT # 1 S4S Pressure-treated #1 grade pine, smooth on four sides, 3x8, 16 ft long. Special order.
-
4 X 6 X 16 P.T. Gc ( Grade Marked ) S4S Pressure-treated pine for ground contact, grade marked, smooth on four sides, 4x6, 16 ft long. Special order.
Plywood & Panels 18
-
Masonite Std Hbd 1/8"x4'x8' Standard hardboard (Masonite), 1/8" thick, 4' x 8' sheet. For backing, protection and craft work.
-
Masonite Temper Hbd 1/4"x4x8' Tempered hardboard (Masonite), 1/4" thick, 4' x 8' sheet - hard and moisture-resistant. For underlayment, backing and jigs.
-
Plywood A/C Pine 1/2" 4'x8' A/C pine plywood, 1/2" thick, 4' x 8' sheet - one sanded, paint-ready face. For cabinets, shelving and projects where one side shows.
-
Plywood A/C Pine 1/4" 4'x8' A/C pine plywood, 1/4" thick, 4' x 8' sheet - one sanded, paint-ready face. For cabinets, shelving and projects where one side shows.
-
Plywood A/C Pine 3/4" 4'x8' A/C pine plywood, 3/4" thick, 4' x 8' sheet - one sanded, paint-ready face. For cabinets, shelving and projects where one side shows.
-
Plywood A/C Pine 3/8" 4'x8' A/C pine plywood, 3/8" thick, 4' x 8' sheet - one sanded, paint-ready face. For cabinets, shelving and projects where one side shows.
-
Plywood A/C Pine 5/8" 4'x8' A/C pine plywood, 5/8" thick, 4' x 8' sheet - one sanded, paint-ready face. For cabinets, shelving and projects where one side shows.
-
Plywood CDX P.T. 1/2" 4'x8' Pressure-treated CDX plywood, 1/2" thick, 4' x 8' sheet. For exterior and moisture-prone sheathing.
-
Plywood CDX P.T. 3/4" 4'x8' Pressure-treated CDX plywood, 3/4" thick, 4' x 8' sheet. For exterior and moisture-prone sheathing.
-
Plywood CDX P.T. 5/8" 4'x8' Pressure-treated CDX plywood, 5/8" thick, 4' x 8' sheet. For exterior and moisture-prone sheathing.
-
Plywood CDX Shtng 1/2" 4'x8' CDX sheathing plywood, 1/2" thick, 4' x 8' sheet. For roof, wall and subfloor sheathing.
-
Plywood CDX Shtng 3/4" 4'x8' CDX sheathing plywood, 3/4" thick, 4' x 8' sheet. For roof, wall and subfloor sheathing.
-
Plywood CDX Shtng 3/8" 4'x8' CDX sheathing plywood, 3/8" thick, 4' x 8' sheet. For roof, wall and subfloor sheathing.
-
Plywood CDX Shtng 5/8" 4'x8' CDX sheathing plywood, 5/8" thick, 4' x 8' sheet. For roof, wall and subfloor sheathing.
-
Plywood Film Face 3/4" 4x8 Film-faced plywood, 3/4" thick, 4' x 8' sheet with a smooth, water-resistant face. For concrete forms - releases cleanly and reuses well.
-
Plywood T1/11 Deco 9/16 4" OC T1-11 siding panel with grooves 4" on center, 9/16" thick, 4' x 8' sheet. Grooved exterior siding.
-
Plywood T1/11 P.T. Rough 5/8" 4 Pressure-treated T1-11 siding panel, rough sawn, 5/8" thick, 4' x 8' sheet. Grooved exterior siding.
-
Plywood T1/11 Pine Rough 5/8" 4 T1-11 pine siding panel, rough sawn, 5/8" thick, 4' x 8' sheet. Grooved exterior siding.
Decking 20
-
0.9"X5.5"X16' Cortes Series Rustic and Wood Grained Deck Boards US07-G9 Color Wn Composite deck board, 0.9x5.5, 16 ft long, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
1X6X16' Trex Enhance Foggy Wharf Grooved Composite deck board, 1x6, 16 ft long, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
1X6X20 Trex Enhance Toasted Sand Grooved Composite deck board, 1x6, 20 ft long, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
5/4"X6"X16' Concordia Horizon Symmetry Ipe Grooved Composite deck board, 5/4x6, 16 ft long, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
5/4x6x16' Grooved Good Life Weekender Cabin Color Composite deck board, 5/4x6, 16 ft long, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
5/4x6x16' Solid Good Life Weekender Cabin Color Composite deck board, solid edge, 5/4x6, 16 ft long - for stair treads, borders and edges. Special order.
-
AW02 Edge Strip Finishing edge strip for composite decking. Special order.
-
AW08 #8 Screw 1000PCS Box Color-matched screws for composite decking (box). Special order.
-
AW08 Clips 90PCS Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
AW08 Clips 90PCS Box Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
Bkt Brd C ST/ Sp Hidden Fasteners Starter Clips Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
Bkt Brd C St/Sp 25 Count Hidden Fasteners Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
Bkt Brd Ce 900CT Clip / 900 Count Pail - 500 Sq Ft Coverage Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
Bkt Brd Ce 900CT- 500 Sq Ft Coverage Fiberon Edge Hidden Fasteners Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
T-7 Rubber Stop 50PCS Box Rubber stops for composite decking (box). Special order.
-
Trex Hidden Fast Uni Con Clp 500 Sf Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
Universal Trex Hideaway Hidden Fasteners Hidden deck fasteners - clips that hold grooved boards with no visible screws. Special order.
-
US09 Peruvian Teak Composite deck board, grooved for hidden fasteners. Low-maintenance, won't rot or splinter. Special order.
-
US095169 Ntw Siding Peruvian Teak Composite siding board. Special order - ask about colors and lead time.
-
WH36-Wh36-Walls Raised 5 7/8"silver Fox Gray Composite siding board. Special order - ask about colors and lead time.
Concrete, Cement & Block 20
-
Base Coat Stucco 80lbs Base-coat stucco, 80 lb bag. First coats over lath or block.
-
Block Column 8"x12"x12" Column (pilaster) block, 8" x 12" x 12". For building block columns and pilasters.
-
Block Column 8"x16"x16" Column (pilaster) block, 8" x 16" x 16". For building block columns and pilasters.
-
Block Half-Height 4"x8"x16" Half-height concrete block, 4" x 8" x 16". For finishing courses and adjusting wall height.
-
Block Partition 8"x4"x16" Partition concrete block, 8" x 4" x 16". For non-load-bearing walls.
-
Block Regular 8"x8"x16" Standard concrete block (CMU), 8" x 8" x 16". For load-bearing and exterior walls.
-
Brick 2"x4"x8" Gray Concrete brick, 2" x 4" x 8". For walls, planters and fill-in.
-
Concrete Mix 80 Lb Paper Bag Concrete mix, 80 lb bag - just add water. For posts, pads and small pours.
-
Grey Portland Cement 94 lbs. Gray Portland cement, 94 lb bag. Mix with sand and gravel for concrete, or with sand for mortar and stucco.
-
High Strength 80 lbs. High-strength concrete mix, 80 lb bag - just add water. For slabs, footings and posts.
-
Masonry Reinf.Ladder 8"X10'8" Ladder-type masonry joint reinforcement, 8" wide, 10 ft long. Laid between block courses to strengthen walls.
-
Mortar Mix Ready 80 lbs. Ready-mix mortar, 80 lb bag - just add water. For laying block and brick.
-
Pallet Charge Pallet charge - added when block or brick is delivered on a pallet.
-
Parking Bumper with Pins Concrete parking bumper with pins. For parking spaces and driveways.
-
Stucco Cement 80 lbs Stucco cement, 80 lb bag. For scratch and brown coats.
-
Thinset Sanded Gray 50 lbs. Gray sanded thinset, 50 lb bag. For setting floor and wall tile.
-
Thinset Sanded White Bag 50LB White sanded thinset, 50 lb bag. For setting tile, especially light tile and stone.
-
Water Stop 10 lbs Hydraulic water-stop cement. Sets fast to plug leaks in concrete and block.
-
Water Stop 20 lbs. Hydraulic water-stop cement. Sets fast to plug leaks in concrete and block.
-
Water Stop 50 lbs. Hydraulic water-stop cement. Sets fast to plug leaks in concrete and block.
Rebar 27
-
Rebar #3 (3/8") 40' Straight #3 steel rebar, 3/8" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #3 (3/8") Bent #3 rebar (3/8") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #3 (3/8") Ties (stirrups) made from #3 rebar (3/8") in our shop, to the sizes you need.
-
Rebar #4 (1/2") 40' Straight #4 steel rebar, 1/2" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #4 (1/2") Bent #4 rebar (1/2") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #4 (1/2") Ties (stirrups) made from #4 rebar (1/2") in our shop, to the sizes you need.
-
Rebar #5 (5/8") 40' Straight #5 steel rebar, 5/8" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #5 (5/8") Bent #5 rebar (5/8") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #5 (5/8") Ties (stirrups) made from #5 rebar (5/8") in our shop, to the sizes you need.
-
Rebar #6 (3/4") 40' Straight #6 steel rebar, 3/4" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #6 (3/4") Bent #6 rebar (3/4") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #6 (3/4") Ties (stirrups) made from #6 rebar (3/4") in our shop, to the sizes you need.
-
Rebar #7 (7/8") 40' Straight #7 steel rebar, 7/8" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #7 (7/8") Bent #7 rebar (7/8") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #7 (7/8") Ties (stirrups) made from #7 rebar (7/8") in our shop, to the sizes you need.
-
Rebar #8 (1") 40' Straight #8 steel rebar, 1" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #8 (1") Bent #8 rebar (1") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #8 (1") Ties (stirrups) made from #8 rebar (1") in our shop, to the sizes you need.
-
Rebar #9 (1-1/8") 40' Straight #9 steel rebar, 1-1/8" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #9 (1-1/8") Bent #9 rebar (1-1/8") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #9 (1-1/8") Ties (stirrups) made from #9 rebar (1-1/8") in our shop, to the sizes you need.
-
Rebar #10 (1-1/4") 40' Straight #10 steel rebar, 1-1/4" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #10 (1-1/4") Bent #10 rebar (1-1/4") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #10 (1-1/4") Ties (stirrups) made from #10 rebar (1-1/4") in our shop, to the sizes you need.
-
Rebar #11 (1-3/8") 40' Straight #11 steel rebar, 1-3/8" diameter, in 40 ft lengths. We can cut it to length for you.
-
Rebar #11 (1-3/8") Bent #11 rebar (1-3/8") bent in our shop to your shape and dimensions - bring or send us your bending list.
-
Rebar Tie #11 (1-3/8") Ties (stirrups) made from #11 rebar (1-3/8") in our shop, to the sizes you need.
Drywall & Plaster 24
-
Casing Bead 1/2"x10' Plastic Plastic casing bead, 1/2" wide, 10 ft long. Gives a clean finished edge where drywall or plaster meets another surface.
-
Casing Bead 3/4"x10' Plastic Plastic casing bead, 3/4" wide, 10 ft long. Gives a clean finished edge where drywall or plaster meets another surface.
-
Corner Bead DWALL 10' Metal Drywall corner bead, 10 ft long. Protects and straightens outside corners.
-
Corner Bead DWALL 10' Plastic Drywall corner bead, 10 ft long. Protects and straightens outside corners.
-
Corner Bead DWALL 8' Metal Drywall corner bead, 8 ft long. Protects and straightens outside corners.
-
Corner Bead DWALL 8' Plastic Drywall corner bead, 8 ft long. Protects and straightens outside corners.
-
Corner Bead Expnded 10' Metal Expanded-flange corner bead, 10 ft long. Protects outside corners under plaster and stucco.
-
Corner Bead Expnded 10' Plast Expanded-flange corner bead, 10 ft long. Protects outside corners under plaster and stucco.
-
Corner Bead Expnded 8' Metal Expanded-flange corner bead, 8 ft long. Protects outside corners under plaster and stucco.
-
Corner Bead Expnded 8' Plast Expanded-flange corner bead, 8 ft long. Protects outside corners under plaster and stucco.
-
Drywall F.C. 5/8"X4'X8' Fire-code (Type X) drywall, 5/8" thick, 4' x 8' sheet. For fire-rated walls and ceilings, such as garages.
-
Drywall Reg. 1/2"X4'X8' Regular drywall, 1/2" thick, 4' x 8' sheet. For standard interior walls and ceilings.
-
Drywall XP Board 1/2" 4'x 8' Mold- and moisture-resistant drywall, 1/2" thick, 4' x 8' sheet. For bathrooms, laundry rooms and humid areas.
-
Durabond 20 Durabond setting-type joint compound (powder). Hardens chemically - fast and strong, for fills and first coats.
-
Durabond 45 Durabond setting-type joint compound (powder). Hardens chemically - fast and strong, for fills and first coats.
-
Durock Cement Brd 1/2" 3'x5' Durock cement board, 1/2" thick, 3' x 5' sheet. Tile backer for showers, tubs and floors.
-
Durock Cement Brd 1/2" 4'x 8' Durock cement board, 1/2" thick, 4' x 8' sheet. Tile backer for showers, tubs and floors.
-
Expansion Joint 1/2X4"X10' Expansion / control joint, 1/2x4, 10 ft long. Lets stucco and plaster move without cracking.
-
Joint Compound 1 gal Pre-mixed joint compound ("mud"). For taping, finishing and patching drywall.
-
Joint Compound 5 gal Pre-mixed joint compound ("mud"). For taping, finishing and patching drywall.
-
Metal Lath Diamond Galv Galvanized diamond metal lath. The base for stucco and plaster.
-
Metal Lath Rib Galv 3.4 Galvanized rib lath. Stiffer lath for plaster on ceilings and wider spans.
-
Metal Lath Tile P/B Galv 2.5 Galvanized paper-backed lath. Base for tile mortar beds and stucco.
-
Rosin Paper 36" Gray (Roll) Rosin paper roll, 36" wide. Protects floors during work and as an underlayment.
Insulation 8
-
Insul R-11 3.5x15x94 88.12SF R-11 fiberglass insulation batts. For 2x4 walls.
-
Insul R-19 6-1/2x16x96 48.96SF R-19 fiberglass insulation batts. For 2x6 walls and floors.
-
Insul R-19 6-1/2x23x48 75.08SF R-19 fiberglass insulation batts. For 2x6 walls and floors.
-
Insul R-30 16"x48" Batts 58.66SF R-30 fiberglass insulation batts. For attics and ceilings.
-
Insul R-30 24"x48" Batts 88SF R-30 fiberglass insulation batts. For attics and ceilings.
-
Insul R11 3.5x23x94 135.12SF R-11 fiberglass insulation batts. For 2x4 walls.
-
Insul R52 Alum Foil 16" 500SF Reflective aluminum-foil insulation / radiant barrier, 500 sq ft roll. Cuts heat gain in attics and walls.
-
Insul R52 Alum Foil 24" 500SF Reflective aluminum-foil insulation / radiant barrier, 500 sq ft roll. Cuts heat gain in attics and walls.
Metal Studs & Track 7
-
Hi Hat 12' Hat channel (furring channel), 12'. For furring ceilings and walls.
-
Metal Stud 1-5/8"x 8' 25GA Steel stud, 25 gauge, 1-5/8" wide, 8 ft long. For non-load-bearing interior walls.
-
Metal Stud 1-5/8"x10' 25GA Steel stud, 25 gauge, 1-5/8" wide, 10 ft long. For non-load-bearing interior walls.
-
Metal Stud 3-5/8"x 8' 25GA Steel stud, 25 gauge, 3-5/8" wide, 8 ft long. For non-load-bearing interior walls.
-
Metal Stud 3-5/8"x10' 25GA Steel stud, 25 gauge, 3-5/8" wide, 10 ft long. For non-load-bearing interior walls.
-
Metal Track 1-5/8"x10' 25GA Steel track, 25 gauge, 1-5/8" wide, 10 ft long. Top and bottom plate for steel stud walls.
-
Metal Track 3-5/8"x10' 25GA Steel track, 25 gauge, 3-5/8" wide, 10 ft long. Top and bottom plate for steel stud walls.
Hardware & Connectors 49
-
Anchor Bolt 3/4"x 8" Anchor bolt, 3/4" x 8". Ties sill plates and framing to concrete.
-
Block Stops 2-HOLE H.D. Heavy-duty block stops. Hold framing and fixtures at block openings.
-
Brick Ties Galv 22GA Concrete brick. For walls, planters and fill-in.
-
Butterfly Hanger 2x4 Butterfly hanger for 2x4. Connector for joining framing members.
-
Drill Tie Chuck Adaptor Drill-tie part. Ask our team which size fits your job.
-
Drill Tie Clip Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes Blue 2-1/4 X 8 Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes Green 2-1/4x7-5/8 Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes Orange 2-1/8x7-5/8 Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes Red 2-1/4x12 Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes White 2-1/4x24 Drill-tie part. Ask our team which size fits your job.
-
Drill Tippes Yellow 2-1/4x16 Drill-tie part. Ask our team which size fits your job.
-
Hd Joist Hanger 2"x 10" 16ga Heavy-duty joist hanger, 2" x 10". Connects joists to beams and ledgers.
-
Hd Joist Hanger 2"x 6" 16ga Heavy-duty joist hanger, 2" x 6". Connects joists to beams and ledgers.
-
Hd Joist Hanger 2"x8" 14ga Heavy-duty joist hanger, 2" x 8". Connects joists to beams and ledgers.
-
Hd Truss Face Hanger (2)2x6-8 Heavy-duty face-mount truss hanger for 2x6-2x8. Connects trusses and joists to a header.
-
Hd Truss Face Hanger 2x6-8 Heavy-duty face-mount truss hanger for 2x6-2x8. Connects trusses and joists to a header.
-
Holden Double Strap 16" Anchr Holden double strap anchor. Ties roof trusses down to block walls - hurricane protection.
-
Holden Double Strap 20" Anchr Holden double strap anchor. Ties roof trusses down to block walls - hurricane protection.
-
Hurricane Clip Lh Hurricane clip. Ties rafters and trusses to the top plate against wind uplift.
-
Hurricane Clip Rh Hurricane clip. Ties rafters and trusses to the top plate against wind uplift.
-
Hurricane/Seismic Anchors 2x Hurricane / seismic anchor for 2x framing. Resists wind uplift and movement.
-
Ideal Reel Ideal reel - dispenser reel for banding and strapping.
-
Mending Prong Plates 2"x 4" Mending prong plate, 2" x 4". Joins and repairs wood framing.
-
Mending Prong Plates 3"x 6" Mending prong plate, 3" x 6". Joins and repairs wood framing.
-
Mending Prong Plates 5"x 8" Mending prong plate, 5" x 8". Joins and repairs wood framing.
-
Post Anchor 4"x4" Post anchor for 4x4 posts. Holds posts to concrete.
-
Rafter Ties 12" Flat Flat rafter / truss tie, 12" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 12" Twisted Twisted rafter / truss tie, 12" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 16" Flat Flat rafter / truss tie, 16" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 16" Twisted Twisted rafter / truss tie, 16" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 18" Flat Flat rafter / truss tie, 18" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 18" Twisted Twisted rafter / truss tie, 18" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 20" Flat Flat rafter / truss tie, 20" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 20" Twisted Twisted rafter / truss tie, 20" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 24" Flat Flat rafter / truss tie, 24" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 24" Twisted Twisted rafter / truss tie, 24" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 30" Flat Flat rafter / truss tie, 30" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 30" Twisted Twisted rafter / truss tie, 30" long. Ties trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 36" Flat Flat rafter / truss tie, 36" long. Straps trusses and rafters to the wall - hurricane strap.
-
Rafter Ties 36" Twisted Twisted rafter / truss tie, 36" long. Ties trusses and rafters to the wall - hurricane strap.
-
Safety Fence 4'X100' Orange safety fence, 4' x 100'. For job sites, excavations and crowd control.
-
Skewed 45_ Hanger 2"x6"-8" Lh 45-degree skewed joist hanger for 2x6-2x8. For joists that meet at an angle.
-
Skewed 45_ Hanger 2"x6"-8" Rh 45-degree skewed joist hanger for 2x6-2x8. For joists that meet at an angle.
-
Slant Nail Joist Hanger 2x8" 18ga Slant-nail joist hanger for 2x8, 18 gauge.
-
Steel Banding Perf 3/4"X1000' Perforated steel banding (strapping), 3/4" wide, 1000 ft long. For bracing, hanging and tying.
-
Steel Banding Perf 3/4"X200' Perforated steel banding (strapping), 3/4" wide, 200 ft long. For bracing, hanging and tying.
-
Structural Angle HDG 4"x4"x1/4 Hot-dipped galvanized structural steel angle, 4" x 4".
-
Truss Anchor Lateral 16" Lateral truss anchor, 16". Braces trusses against sideways movement.
Nails & Screws 21
-
Drywall Screw 1" (10M/BOX) Drywall screws, 1" long, sold by the pound. For hanging drywall on wood or light steel.
-
Drywall Screw 1-1/4" (8M/BOX) Drywall screws, 1-1/4" long, sold by the pound. For hanging drywall on wood or light steel.
-
Drywall Screw 1-5/8" (5M/BOX) Drywall screws, 1-5/8" long, sold by the pound. For hanging drywall on wood or light steel.
-
Drywall Screw 2-1/2" (2.5M/BOX) Drywall screws, 2-1/2" long, sold by the pound. For hanging drywall on wood or light steel.
-
Drywall Screw 3" (2M/BX) Drywall screws, 3" long, sold by the pound. For hanging drywall on wood or light steel.
-
Framing Screws 7/16" (15M/BX) Framing screws, 7/16" (sold by the pound). For steel stud framing.
-
Joist Hanger Nail 1-1/2" Heavy-duty joist hanger, 1-1/2" long. Connects joists to beams and ledgers.
-
Nails Comm Brite 16D 3-1/2" Common nails, bright (uncoated), 16d (3-1/2" long). For general interior framing.
-
Nails Comm Brite 8D 2-1/2 Common nails, bright (uncoated), 8d (2-1/2" long). For general interior framing.
-
Nails Comm E.G. 10D 3" Common nails, electro-galvanized, 10d (3" long). Rust-resistant, for general framing.
-
Nails Comm E.G. 16D 3-1/2" Common nails, electro-galvanized, 16d (3-1/2" long). Rust-resistant, for general framing.
-
Nails Comm E.G. 20D 4" Common nails, electro-galvanized, 20d (4" long). Rust-resistant, for general framing.
-
Nails Comm E.G. 8D 2-1/2 Common nails, electro-galvanized, 8d (2-1/2" long). Rust-resistant, for general framing.
-
Nails Cut Masonry 4D 1-1/2 Cut masonry nails, 4d (1-1/2" long). For fastening wood to concrete and block.
-
Nails Duplex Brite 16D 3-1/2" Duplex (double-head) nails, 16d (3-1/2" long). Easy to pull - for forms, scaffolds and temporary work.
-
Nails Duplex Brite 8D 2-1/2 Duplex (double-head) nails, 8d (2-1/2" long). Easy to pull - for forms, scaffolds and temporary work.
-
Nails Finish E.G. 16D 3-1/2" Finish nails, electro-galvanized, 16d (3-1/2" long). Small head for trim and finish work.
-
Nails Stub Galv 1" Galvanized roofing stub nails, 1" long. For felt, tin caps and roofing.
-
Nails Stub Galv 1-1/4" Galvanized roofing stub nails, 1-1/4" long. For felt, tin caps and roofing.
-
Nails Stub Galv 3/4" Galvanized roofing stub nails, 3/4" long. For felt, tin caps and roofing.
-
Tin Caps 1-5/8" Product Control Tin caps with Florida product approval. Hold roofing felt down.
Roofing 6
-
Angle Flashing 5"x7" 10' 26GA Angle flashing, 26 gauge, 5" x 7". Seals roof-to-wall joints.
-
Cut Felt #15 2 Cut #15 roofing felt strip. For flashing and small repairs.
-
Eave Drip 3" 10' 26GA. Eave drip edge, 26 gauge, 10 ft long. Protects roof edges and guides water off.
-
Roof Cement *Approved* 5GL. Approved roof cement, 5 gal. For sealing flashing, patching and repairs.
-
Roof Felt #15 Ul Astm (432SF) #15 roofing felt underlayment (432 sq ft roll), UL / ASTM rated.
-
Roof Felt #30 (216SF) Not-Approved #30 roofing felt (216 sq ft roll). Heavier underlayment; not product-approved for roofs in Florida.
Vents 4
-
Screen Vents 4"x16" Screen vent, 4" x 16". For soffit and wall ventilation.
-
Screen Vents 6"x16" Screen vent, 6" x 16". For soffit and wall ventilation.
-
Soffit Vent 4"X10' Vinyl Vinyl continuous soffit vent, 4" wide, 10 ft long. Lets air into the attic through the soffit.
-
Soffit Vent 6"X10' Vinyl Vinyl continuous soffit vent, 6" wide, 10 ft long. Lets air into the attic through the soffit.
Site Supplies 4
-
Stakes Steel Round "Nail" 24" Pointed yellow pine wood stake, 24" long. For layout, forms and landscaping.
-
Stakes Steel Round "Nail" 30" Pointed yellow pine wood stake, 30" long. For layout, forms and landscaping.
-
Stakes Steel Round "Nail" 36" Pointed yellow pine wood stake, 36" long. For layout, forms and landscaping.
-
Wheelbarrow 6 Cu Ft Steel/Wood Handle 6 cu ft steel wheelbarrow with wood handles. For mixing and moving concrete, soil and debris.
No products match. Call us - we may still be able to get it.
Pictures are illustrations, not photos of the actual products.